HYDREMA 910MCV2 - WORLD WIDE

High mobility means worldwide usability

The 910MCV2 is large enough to clear mines of 10kg TNT in a path that is 3.5 metres wide but at the same time it is small enough to be transported by railway, and it even fits in a Hercules C130! Furthermore, with its maximum axle load of 10 tons it is self-transportable on the same roads and bridges as ordinary trucks at a speed of up to 42 km/h.

With constant 4WD the 910MCV2 is capable of overcoming even the most difficult terrain, and it is equipped with a winch in case the vehicle becomes bogged down in poor ground conditions.

Tilt/turn system enables change of size

The wider the path that is cleared the faster the minefield can be cleared, but at the same time transportation can be a problem if the mine-clearing vehicle is too large. However, with the 910MCV2 this dilemma has been solved. A unique tilt/turn system means that the complete mine-clearing unit, with flail and deflector plate, can be stowed over the rear end of the machine for transportation, making the 910MCV2 less than 2.8 metres wide.

However, once the 910MCV2 is at the place of mine clearing, the hydraulic tilt/turn system is activated from within the cabin and in less than 2 minutes, without the use of tools, the 910MCV2 is ready for clearing. During mine clearing it then clears a path with a width of 3.5 metres, wide enough even for an APC (armoured personnel carrier)!

The 910MCV2 is the only mine-clearing vehicle that can go directly from driving on public roads into a minefield and be ready for mine-clearing action so quickly and with so little work required. This allows the operator to spend less time outside the safety of the cabin and more time on clearing mines.

High mobility of the 910MCV2 means easy deployment all over the world.