Hydrema MX14G: Compact Wheeled Excavator with Great Power

EXCAVATOR

Experience the compact power and versatility of the Hydrema MX14G's two-piece boom, standard on all models. Designed for precision and strength, our digging arm is constructed from high-strength steel and is available in 2.0 m and 2.5 m lengths to match your specific needs. To maximise your efficiency, the MX14G offers hydraulic quick hitch and an optional tiltrotator, making it a breeze to switch between attachments. Whatever the task, the MX14G gives you the flexibility and strength to get the job done efficiently.

UNDERCARRIAGE

Customise your Hydrema MX14G for any job with six specially designed undercarriage setups. No matter the terrain, this wheeled excavator offers a configuration to maximise stability and efficiency:

Rear dozer blade (A1)
Front dozer blade (A1V)
Front/rear dozer blade (2xA1)
Front dozer blade/rear stabilisers (A3)
Front stabilisers/rear dozer bl. (A3V)
Front/rear stabilisers (A4)

Choose the variant that suits your work and experience how MX14 adapts to your needs and improves your workday productivity and comfort.

undercarriage for MX14G

AXLES

The Hydrema MX14G is equipped with advanced ZF axles that, with planetary reduction in the hubs, offer outstanding torque and control, making precision work a breeze. Each axle is equipped with built-in brakes that enhance digging brake capacity, and the front axle is designed with a center bolt and pendulum lock, resulting in a pendulum angle of +/- 8º. This improves stability and maneuverability on uneven terrain.

STEERING

Hydrema MX14G is equipped with a hydraulic steering system that guarantees precise manoeuvring even in the most demanding conditions. With the option to add joystick steering that supports speeds up to 20 km/h, the operator has extended control and an enhanced driving experience. This option makes it possible to handle the MX14G's power and precision with just a light touch, turning complex manoeuvres into simple tasks.

HYDRAULIC SYSTEM

The Hydrema MX14G offers a sophisticated dual-circuit hydraulic system with Load Sensing technology and a separate high-pressure hydrostatic bending system, ensuring precise and efficient operation. With electronic power regulation of the work hydraulics and intelligent Mode Control, you can optimise precision work and achieve fuel savings via ECO Mode. Adapted to modern requirements, up to three hydraulic circuits (two as standard) can be easily adjusted directly from the cab, giving you full control over oil pressure and flow for up to ten different attachments. The Hydrema MX14G ensures a streamlined operation with the capabilities to switch between tasks quickly and effortlessly, maximising your productivity on the jobsite.

Oil quantity:
Pump 1: - Working hydraulics - 319 l/min
Pump 2: - Slew hydraulics - 88 l/min

System pressure:

Working hydraulics: - 350 Bar
Slew hydraulics: - 395 Bar
Hydraulic circuit 1, ZV1: - 30-200 L/min
Hydraulic circuit 2, ZV2: - 15-100 l/min
Hydraulic circuit 3, ZV3: - 50-200 l/min

ENGINE

The Hydrema MX14G is equipped with a robust Cummins B 4.5 L Stage V engine, that combines environmental responsibility with powerful performance. This advanced engine includes a DOC, DPF and SCR catalyst system with AdBlue addition that reduces emissions and meets strict environmental standards. With a 16-valve common-rail turbodiesel system and an intercooler, the engine delivers up to 175 hp and a maximum torque of 780 Nm. The large 280 L fuel tank and 31.5 L AdBlue tank ensure long working intervals and reduce refuelling time. The Hydrema MX14G is designed to deliver optimal performance without compromising on sustainability.

DRIVING HYDRAULICS & TRANSMISSION

With the Hydrema MX14G's hydrostatic drive and constant 4-wheel drive, you're guaranteed a machine that delivers smooth power transfer and traction across all surfaces. The electronically controlled drive motor ensures variable speed control, while the innovative 2-speed soft-shift Powershift transmission gives you the choice of manual or automatic gear shifting - for a driving experience that's precisely customised to your needs.

Road gear (km/h): 37
Off-road gear (km/h): 0-9
Creep gear (km/h): 4
Max. traction (kN): 104 (111)

Speeds are given for a standard machine with dozer blade and standard tyre fitment. With additional weight such as supports, tiltrotator and heavy attachments or other equipment, the maximum speed may be lower.

ELECTRICAL SYSTEM

The Hydrema MX14G is equipped with a robust 24V electrical system, complete with a powerful 70 Amp generator and two durable 12V, 100Ah batteries, ensuring continuous and reliable power. This wheeled excavator has extra-protected wiring and uses only waterproof connectors on the outside, extending the life of the system and ensuring constant operation without failures. With a convenient location of fuses and relays at the cabin, you can easily perform quick checks and maintenance. And for added safety, the MX14G is equipped with an emergency electric drive function that kicks in if the main electronic systems fail, as well as an automatic circuit breaker that protects the machine and simplifies maintenance.

Width across:	m.m.
Blade	2550
Support, lowered	3870
Tire 10.00-20	2530
Tire 600/40-R22.5	2520
Tire 650/45-R22.5	2570
Tire 710/40-R22,5	2730
Track width with standard tires	1942
Wheelbase	2600
Distance, pivot center to rear axle	1200
Distance, pivot center to front axle	1400
Clearance height, cab	3120
Transport height	4000
Length, road transport	6500
Overhang, front (with 2.5 M stick)	3330
Rear distance, pivot center – counterweight	1550
Swing radius, rear	1733
Ground clearance, stabiliser	350
Ground clearance, wheels, lower stabiliser	50
Ground clearance, blade	510
Ground clearance, wheels, lower blade	75
Overhang, blade	1175
Overhang, stabiliser	1110
Ground clearance, axles	360
Swing radius, front
with 2.0 M dipper	1660
with 2.5 M dipper	1950
with 3.0 M dipper	–
Total length during transport, 2.5 M dipper	8100
Height of two-piece boom during shipping, 2.5 M dipper	3000
Center shift, two-piece boom	118
Outside turn radius	6700
Inside turn radius	3600

Chassis	Kg
A1 – Blade	16,000
A3 – Blade + stabiliser	17,200
2 x A1 – Front and rear blade	17,100
A4 – Front and rear stabiliser	17,300

Length of dipper	m.m.	2.0	2.5	3.0
Strike height	m.m.	9790	10250	–
Lifting height	m.m.	8730	9190	–
Digging depth	m.m.	4410	4900	–
Range	m.m.	8300	8780	–
Vertical digging depth	m.m.	3200	3700	–
Horizontal digging depth	m.m.	4780	6080	–
Lifting height	m.m.	6210	6710	–
Working depth	m.m.	5320	5820	–
Range	m.m.	7640	8120	–
Bucket rotation angle	°	175	175	–
Breakout force, directly mounted bucket
Breakout force, bucket (ISO)	kN	106
Digging force (ISO)	kN	82	70	–
Max. recommended bucket size
Standard bucket	m³	0.80
Max. recommended bucket size with tiltrotator
Standard bucket	m³	0,60

Width across:	ft in
Blade	8’4″
Support, lowered	12’8″
Tire 10.00-20	8’4″
Tire 600/40-R22.5	8’3″
Tire 650/45-R22.5	8’5″
Tire 710/40-R22,5	8’11″
Track width with standard tires	6’4″
Wheelbase	8’6″
Distance, pivot center to rear axle	3’11″
Distance, pivot center to front axle	4’7″
Clearance height, cab	10’3″
Transport height	13’1″
Length, road transport	21’4″
Overhang, front (with 8’2″ stick)	10’11″
Rear distance, pivot center – counterweight	5’1″
Swing radius, rear	5’8″
Ground clearance, stabiliser	1’2″
Ground clearance, wheels, lower stabiliser	0’2″
Ground clearance, blade	1’8″
Ground clearance, wheels, lower blade	0’3″
Overhang, blade	3’10″
Overhang, stabiliser	3’8″
Ground clearance, axles	1’2″
Swing radius, front
with 6’7″ dipper	5’5″
with 8’2″ dipper	6’5″
with 9’10″ dipper	–
Total length during transport, 8’2″ dipper	26’7″
Height of two-piece boom during shipping, 8’2″ dipper	9’10″
Center shift, two-piece boom	0’5″
Outside turn radius	22’0″
Inside turn radius	11’10″

Chassis	lb
A1 – Blade	35,274
A3 – Blade + stabiliser	37,919
2 x A1 – Front and rear blade	37,699
A4 – Front and rear stabiliser	38,140

Hydrema MX14G – Compact Design, Powerful Performance

MX14G – Performance Where Space is Limited

HIGH HYDRAULIC PERFORMANCE

SAFETY AND CLARITY

COMFORTABLE WORKSTATION

PRECISE SWING CONTROL

EFFICIENT SERVICE AND MAINTENANCE

POWERFUL PERFORMANCE

Get Behind the Controls of the MX14G

Brochures and Leaflets

MXG Series Leaflet

MXG Series Brochure

Understand the Terminology – The Hydrema Dictionary

What is AdBlue?

What is ROPS/FOPS?

What is a Wheeled Excavator?

What is Load Sensing?

What is Hydraulics?

What is Hydrostatic Transmission?

What is Telematics?

Meet the MX Family

MX

16G

MX

17G

MX

18G

MX

20G

Request a Quote

Length of dipper	ft in	6’7″	8’2″	9’10″
Strike height	ft in	32’1″	33’8″	–
Lifting height	ft in	28’8″	30’2″	–
Digging depth	ft in	14’6″	16’1″	–
Range	ft in	27’3″	28’10″	–
Vertical digging depth	ft in	10’6″	12’2″	–
Horizontal digging depth	ft in	15’8″	19’11″	–
Lifting height	ft in	20’4″	22’0″	–
Working depth	ft in	17’5″	19’1″	–
Range	ft in	25’1″	26’8″	–
Bucket rotation angle	º	175	175	–
Breakout force, directly mounted bucket
Breakout force, bucket (ISO)	lbf	23821
Digging force (ISO)	lbf	18428	15731	–
Max. recommended bucket size
Standard bucket	yd³	1.05
Max. recommended bucket size with tiltrotator
Standard bucket	yd³	0,78