At this year’s Experience Days in April, the Danish-German manufacturer wants to emphasize why it is so important for contractors to invest in a particularly efficient machine.
« Driving Hydrema machines is always an experience. Working with them means maximizing profits for the contractor, » says German Sales Manager Martin Werthenbach.
« Our motto this year is…
« It’s not the multitude of machines on the construction site that is the key to profit, but the one efficient machine on the construction site that ensures profit for the contractor! »
According to the Hydrema, the contractor usually has to cope with very different tasks on the construction site. A trench has to be opened in a narrow construction site with the smallest possible machine, perhaps very heavy material has to be removed from the ground, or a heavy component, such as a water catch basin, has to be lifted in, which is why it is not uncommon to have to dig deeper than 4 m in a narrow area and then load the excavated material onto a truck.
In fact, the number of jobs on the construction site is often very large, as is the number of machines actually required for them. According to Hydrema, all these machines need to be transported and have space to stand on the construction site when they are not needed. « Our answer to the logistical but also cost-intensive challenge for the contractor is an efficient machine with which the contractor can handle everything on the construction site if possible.
Whether material needs to be moved on pallets, or sheet piling needs to be driven into the ground to secure it, or the newly worked-in soil needs to be compacted, the HYDREMA machine operator will complete all these tasks with his city excavator with flying colors and, above all, cost-effectively. If he then even cleans the construction site with the attachment broom at the end, the client is also satisfied and can recommend the contractor for his fast performance, » says the sales manager, referring to the Experience days in Weimar.
People will once again stand in awe in front of the machines at the Hydrema Experience Days
From April 17 to 24, every registered contractor will have the opportunity to test the variety of HYDREMA excavators at their leisure. « We have a wide variety of attachments on site, all of which can be tested with the HYDREMA City excavator. Whether screening or crushing buckets, hydraulic hammers, attachment rams, suction excavators, attachment compactors, everything can be tested. On Saturday, April 20, we don’t want to limit the number of visitors, as this will be our colorful press day with a barbecue and cold drinks. Sunday is the only day of rest for us. That’s when the machines stop. Otherwise, we are expecting a lot of interested customers this week who will not want to miss this opportunity. After all, our dump trucks will also be driving on the test course again and every visitor can take this rollercoaster ride for themselves, because we have great confidence in our dumpers being safe to drive. »
And there are two more real highlights for visitors to take away with them on the Experience Days. Driving a Hydrema multi-purpose wheeled excavator is an experience that you certainly don’t get very often. Although this special machine is very popular in Denmark, in Germany it can only be seen in action by connoisseurs. « We already had a few customers last year who drove the machine here with us and were really enthusiastic afterwards.
The 906G is a powerful, high-thrust wheel loader in the 1.4 cbm class at the front and a 10-tonne wheeled excavator at the rear. Mobile excavator that also has the swivel headstock that is often popular in this small mobile excavator class, with which you can pull the trench along the wall. But what many people don’t know is that our machine can be moved and steered completely with a view of the excavator arm. The swivel range of 280 degrees is enormous and covers almost the entire working range of a normal excavator. Our customers, including, for example, the Bavarian State Forest or the municipality of Markt Velden, have been swearing by this machine for years. Anyone who wants to can see the advantages of this machine for themselves by driving it on our show construction site. »
And finally, Hydrema also has a newcomer to the dumper fleet, which not many customers are likely to have driven before. « Our DT6 is a fully electric dumper that can not only drive nimbly and maneuverably from A to B on the road, but can also follow the diesel dumpers through rough terrain. You can also experience the rollercoaster ride off-road with it. It is important that our visitors have registered. On Saturday, April 20, we have a Public Day with press participation. The day will be full and certainly very entertaining. On the other days, the focus will be exclusively on testing the machines and we will again make sure that it doesn’t get too crowded so that everyone can try everything out at their leisure.
Once again, people can try driving on the dumper test course and admire the small DT6 as it follows in the footsteps of its big brothers.
Registration on these days is therefore obligatory if you want to have a safe time with our machines. And although we show a lot of machines on the show construction site on these days, the following principle applies: « It is not the large number of machines on the construction site that is the key to profit, but the one efficient machine on the construction site that ensures the contractor’s profit! »
Derniers évènements
Évènement
BAUMA 2025 : Hydrema présente ses solutions de terrassement de pointe
24 March 2025
Actualités ou Événement
Hydrema Days 2024 : Portes Ouvertes, Innovation et Réseautage
2 December 2024
Événement
Rejoignez Hydrema à l'Agromek 2024 !
23 October 2024
Événement
Découvrez le Hydrema MX20G au GaLaBau 2024
23 August 2024
Événement
Hydrema au Dyrsku'n i Seljord 2024
22 August 2024
Événement
Découvrez Hydrema à Entreprenad Live 2024
21 August 2024
Restez informé des actualités d'Hydrema
Actualités
La nouvelle série F prête pour les clients
Fin novembre 2015, les premiers modèles de la série F quittent la ligne de production de l'usine Hydrema à Weimar.
Actualités
Nouveau siège social Hydrema aux États-Unis
Nous sommes heureux de vous annoncer les plans de construction de notre nouveau siège social aux États-Unis à Cumming, en Géorgie.
News
Hydrema ouvre sa filiale française à Paris
Pour être plus près de ses clients Hydrema France a été ouverts le 1er mai 2017.
Actualités
Nouvel élévateur pour les pelleteuses MX RAIL
Hydrema réussit à fournir des engins pour les travaux sur voie ferrée et met fortement l'accent sur le développement continu de solutions pour ce secteur. C'est pourquoi un élévateur amovible - pouvant être monté sur les pelleteuses Hydrema MX16 RAIL et MX20 RAIL - est introduit. L'élévateur dispose d'une portée maximale de 12,2 m et est spécialement conçu pour les travaux sur voie ferrée.
Actualités
Hydrema réalisera l'assemblage final du Piranha 5 pour les Forces armées danoises
HYDREMA et GDELS-Mowag ont convenu de conclure un contrat pour l'assemblage final des nouveaux véhicules Piranha 5 destinés aux Forces armées danoises.
Actualités
Benne et vérins de basculement mis à jour sur le tombereau compact d'Hydrema
De nouvelles caractéristiques sont introduites sur le modèle le plus populaire d'Hydrema - le tombereau 912F. Un nouveau design de benne est présenté et les vérins de basculement télescopiques de la version MULTITIP sont remplacés par de nouveaux vérins à double effet.
Actualités
Hydrema assure la maintenance des engins des Forces Armées Danoises
L'ensemble des centres de service danois d'Hydrema sera impliqué dans la fourniture de services ainsi que dans l'approvisionnement en pièces détachées et accessoires pour les engins de terrassement et les tracteurs.
Actualités
Hydrema ready to raise standards for safety with new Dump Truck
Hydrema is ready to set new safety standards for working with small dump trucks when the world's largest construction trade fair, Bauma, opens in Munich on Monday 8 April.